Angle grinder
Serious risk Electric shock, Injuries
- Product
- Angle grinder
- Brand
- Unknown
- Type / model
- WS 500/115 Art. No 67080, bar code: 4 011 458 670 802
- Description
- The motor cover of the angle grinder also serves as a grip and is made of colourful plastic, the switch is covered with black plastic. The product has external screwed brush caps. The second grip can be screwed into one of the holes on the side of the metal crank case. The machine can be switched on by pushing the button forward and switched off by pulling it backwards. The shield is made of iron plate, the cleat welded to it can be fixed onto the crank case by fastening a screw. Main parts of the device: mains plug (10/16A/250V YDB2+mark of manufacturer+mark of test house); mains cable (H05VV-F 2X0,75mm2 SHENG SHI DA +VDE); single-circuit switch (FT3-4/2F1 4(3)A250V5E4+TÜV+mark of manufacturer); condenser (MEX/TENTA MKT 0,22uF K X2 275VAC 40/085/21 EN132400 250VAC+ mark of test house +mark of manufacturer+CE); Technical specification: 230 V; 50 Hz; 500 W; Class II; 11000 RPM; diameter of disc:115 mm.
- Risk
- This product poses a serious risk of :- electric shock because the internal wires are not fixed, therefore they can get into contact with moving parts; - injuries because the power switch is unfixed, therefore it cannot be established when the device is switched off, furthermore there is no warning concerning the moving disc after switching off the device.The product does not comply with the Low Voltage Directive and the relevant European standard EN 50144.
- Measures
- Withdrawal from the market, recall from consumers and fine ordered by the authorities
- Notifying country
- Hungary
- Country of origin
- Germany
- Alert type
- Consumer
- Photos
- Photos shown from the Safety Gate server (European Commission); not copied here.
This page reproduces the Safety Gate record as published. recallarchive is not affiliated with the European Commission. If you own this product, follow the measures above and contact the seller.